Barrel&Wedge-manufacture,factory,supplier from China

(Total 24 Products for Barrel&Wedge)
Accessories List:Pull Collars Hanger Nut Pin Nut  Damping Nut  Domed Ball Washer Barrel&Wedge  Driver Expansion Shell Yield Tube
  Contact Now
SpecificationSandwich system is used for buffering and releasing the pressure of the rocks to protect the bolts from damaging and breaking. It could increase the elongation of the bolts.Especially match with cable bolts to form a high tensile strength,high elongation and high anti-shearing capacity support system.This system is also match with Full threadbar bolt,Grooved bolt,Sharp end bolt,Slot&wedge bolt and so on.Please contact us if more details.
  Contact Now
Key FeaturesLow-cost and high-capacity supportTwin-strand of 15.2mm cable secured by 6.3mm wireSimple design, easy for installationLengths are available up to 12mAvailable in black or hot dip galvanizedMechanical PropertiesProperties15.2mmMinimumTypicalNorminal Strand Diameter15.2mmStrand1x7Cross-Sectional Steel Area143m㎡Mass Per Meter1.13kgYield Load at 1% Extension234.6kN250kNTensile Strength260kN265-270kNElongation on 600mm Gauge Length3.5%6.5%AccessoriesPlate, Barrel&WedgePackageBundle sizes to suit the customer, generally pack of 50pcs
  Contact Now
Functions:Being used with face plate, domed ball,anti-friction washer and nut, Full threadbar bolt can be an effective rock reinforcement system for underground rock support.
  Contact Now
Flat plate for Cable Bolt SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFlat plate for Cable Bolt Features&Advantages               Custom sizes can be provided according to the specific needs of customers.                Suitable for mines with limited overhead space.     &nb
  Contact Now
Steel Reabar Functions:Being used with a face plate, domed ball, and nut.Resin Bolt can be an effective rock reinforcement system for ground support.                                        Steel Reabar Features&Advantages:Available in left hand or right hand tread.Suitable for using with either resin cartridges or cement grout.Higher thread ribs mix resin better and improve anchorage.Due to continuous thread on entire length.
  Contact Now
Combi platePlate TypeCombi TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRCPTop Plate15015072.17YBottom Plate3002802NTRCPTop Plate15015052.34YBottom Plate3002802NTRCPTop Plate15015062.51YBottom Plate3002802NFeatures&AdvantagesAlternate sizes also available as customer’s requirement.Used with flat plate or domed plate to increase support capacity.Two separate plates combine together for one time installation.Enlarge contact surface area to increase the support effect.Long hole is used for hanging of service lines.Available in black or hot dip galvanized.PackageCo
  Contact Now
SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRDP12012040.45YTRDP12512540.49YTRDP15015040.71YTRDP15015050.88YTRDP15015061.06YTRDP15015081.42YTRDP150150122.12NTRDP20020041.26YTRDP20020051.57YTRDP20020082.51NTRDP200200103.14NTRDP200200123.77NTRDP200200144.40NTRDP200200165.02NFeatures&AdvantagesAlternate sizes also available as customer’s requirementDome configuration reinforces much more bearing capacityAvailable in dog ear for hanging service linesThe hole diameter of the friction bolt plate is 2mm bigger than boltThe hole diameter of thread bolt plate is ab
  Contact Now
Domed plate 150X150X8 SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRDP12012040.45YTRDP12512540.49YTRDP15015040.71YTRDP15015050.88YTRDP15015061.06YTRDP15015081.42YTRDP150150122.12NTRDP20020041.26YTRDP20020051.57YTRDP20020082.51NTRDP200200103.14NTRDP200200123.77NTRDP200200144.40NTRDP200200165.02NDomed plate 150X150X8 Features&AdvantagesAlternate sizes also available as customer’s requirementDome configuration reinforces much more bearing capacityAvailable in dog ear for hanging of service linesThe hole diameter of friction bolt plate is 2mm bigger than boltT
  Contact Now
Domed plate 150X150X5 SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRDP12012040.45YTRDP12512540.49YTRDP15015040.71YTRDP15015050.88YTRDP15015061.06YTRDP15015081.42YTRDP150150122.12NTRDP20020041.26YTRDP20020051.57YTRDP20020082.51NTRDP200200103.14NTRDP200200123.77NTRDP200200144.40NTRDP200200165.02NDomed plate 150X150X5 Features&Advantages         Custom sizes can be provided to meet customer specifications.                The dome design
  Contact Now
Domed plate 200X200X6 SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRDP12012040.45YTRDP12512540.49YTRDP15015040.71YTRDP15015050.88YTRDP15015061.06YTRDP15015081.42YTRDP150150122.12NTRDP20020041.26YTRDP20020051.57YTRDP20020082.51NTRDP200200103.14NTRDP200200123.77NTRDP200200144.40NTRDP200200165.02NDomed plate 200X200X6 Features&Advantages                Custom sizes can be provided to meet specific customer needs.           &nb
  Contact Now
Domed plate 150X150X12 SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRDP12012040.45YTRDP12512540.49YTRDP15015040.71YTRDP15015050.88YTRDP15015061.06YTRDP15015081.42YTRDP150150122.12NTRDP20020041.26YTRDP20020051.57YTRDP20020082.51NTRDP200200103.14NTRDP200200123.77NTRDP200200144.40NTRDP200200165.02NDomed plate 150X150X12 Features&Advantages        Custom sizes can be provided to meet specific customer needs.                The dome design sig
  Contact Now
Domed plate 200X200X10 SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRDP12012040.45YTRDP12512540.49YTRDP15015040.71YTRDP15015050.88YTRDP15015061.06YTRDP15015081.42YTRDP150150122.12NTRDP20020041.26YTRDP20020051.57YTRDP20020082.51NTRDP200200103.14NTRDP200200123.77NTRDP200200144.40NTRDP200200165.02NDomed plate 200X200X10 Features&Advantages        Custom sizes can be provided to meet specific customer needs                The dome design sign
  Contact Now
SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFeatures&AdvantagesAlternate sizes also available as customer’s requirementUsed in mine with low headroomUsed in relatively flat rock surfaceUsed in where little or no angularity neededMuti-holes plate is available to fix the breather tube and grout tube used with cable boltsAvailable in black or hot dip galvanizedPackageFlat plates are packed with plywood box, steel pallets & wrapping films. 
  Contact Now
Butterfly plate SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRBP30028021.46NButterfly plate Features&AdvantagesAlternate sizes also available as customer’s requirement.V configuration reinforces much more bearing capacity.Enlarge contact surface area to increase the support effect.Used friendly round corners to avoid scratching the workers.The long hole is used for hanging service lines.Used with flat plate or domed plate to increase support capacity.Available in black or hot dip galvanized.                 &nbs
  Contact Now
Key Features1. High strength alloyed steel.2. Used with rock bolts and mesh to provide extra support.3. Enlarge contact surface area to increase the support effect.4. Alternate sizes also available as customer’s requirements.5. Available in black or hot dip galvanized.Length (mmWidth (mm)Thickness (mm)Dia of hole (mm)1500220230 for round hole2000230430*60 and 30*70mm for long hole 30002806.........Packaging1. Steel or Fiber strapping.2. Bundle sizes to suit the customer, generally packs of 20pcs.
  Contact Now
Weld Wire Mesh Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised sheets available with double or additional wires if requested.3. Suitable for shotcrete applications.4. Customised paint lines along the modules to suit roof bolt patterns.5.
  Contact Now
Key Features1. Wire diameters, spacing and overall dimensions can be customised to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5. Customised sheets available with double or additional wires if requested.6.
  Contact Now
Wire Mesh Black Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5.
  Contact Now
Wire Mesh Mining Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5.
  Contact Now
Wire Mesh Galvanized Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Customised sheets available with double or additional wires if requested.  4. Suitable for shotcrete applications.5.
  Contact Now
Key FeaturesMade of hot rolled reinforcing bar which has rib deformationThe Solid Deformed Bar has a standard rolled thread at one endSuitable for using with either resin capsule or groutDiameter 16mm/18mm/20mm/24mm can be suppliedAvailable in black or hot dip galvanizedMechanical Properties-24mmPropertiesMinimumTypicalYield Strength500MPa245kN540MPa260kNTensile Strength630MPa308kN665MPa327kNElongation A%15%20%Mass Per Meter3.61kgsCross Sectional Area460m㎡Bar Core Diameter24.2mmMajor Bar Diameter27.2mRolled ThreadM24X3.0 PitchNut Breakout Torque140-175NmNotes: Tensile strength of thread e
  Contact Now
Star Plate 150X150X6 SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRSP1501504TRSP1501505TRSP1501506TRSP2002004TRSP2002005TRSP2002006Star Plate 150X150X6 Features&Advantages        Available with a dog ear feature for easy attachment of service lines.                Features rounded corners to minimize the risk of mesh damage during loading.                The dome-shaped profile per
  Contact Now
Flat plate 300x300x10 SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFlat plate 300x300x10 Features&Advantages        Custom sizes can be provided to meet specific customer needs.                Suitable for mines with limited overhead space.               &
  Contact Now
Relate News
In "Comparative Study of the Shear Test Results of a Cable Bolt on Three Laboratory Test Apparatuses," researchers delved deeply into the crucial role of cable bolts in rock reinforcement and provided a more profound understanding of their shear performance by comparing different laboratory test methods.
Fig. 1 Stress fracturing and a bolt exposed on an advance face in a cut-and-fill mine stope. Note the locus of the stress-induced fractures Fig. 2 A rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to shear loads and deviated from its original hole trace. The thick arrows point the direction of possible shear movements in the rockFig. 3 A failed rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to both pull and shear loads prior to failure.
Abstract Rock bolts used for the reinforcement of underground mines, tunnels, and nuclear waste repositories are made up of low and medium-carbon steels, and high-strength low alloy steels. Typical rock bolt systems used for rock reinforcement are mechanically anchored bolts, grout anchored, frictional rock stabilizers and strand anchors.
Abstract: Laboratory pull-out tests were conducted on the following rock bolts and cable bolts: steel rebars, smooth steel bars, fiberglass reinforced polymer threaded bolts, flexible cable bolts, IR5/IN special cable bolts and Mini-cage cable bolts. The diameter of the tested bolts was between 16 mm and 26 mm. The bolts were grouted in a sandstone sample using resin or cement grouts. The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.
Tonry participated in the EXTEMIN PERUMIN, Peru Arequipa International Mining Exhibition from September 25th to 29th, 2023.
Having sponsored AusIMM for three years, Tonry Australia was excited to attend the 2023 AusIMM NWQ Branch Regional Mining Conference in Mount Isa on 8th September 2023
Tonry participated in the AIMEX EXPO, Sydney International Mining Exhibition from September 5th to 7th, 2023.