Expansion Shell Cable Anchor-manufacture,factory,supplier from China

(Total 24 Products for Expansion Shell Cable Anchor)
SpecificationThe expansion shell cable bolt is a spring loaded shell that can be automatically set on installation.
  Contact Now
Key Features:1. Manufactured from high strength full threadbar with a hot forged integral head on one end and the other end has expansion shell.2. Available in left hand or right hand thread.3. Provide the same tensile strength on the entire length.4. Expansion shell bolt with integral head, they are suitable for use in areas where roof is low or when long bolts tails are undesirable.5. Nominal diameter 16mm/18mm/20mm can be supplied.6.
  Contact Now
Accessories List:Pull Collars Hanger Nut Pin Nut  Damping Nut  Domed Ball Washer Barrel&Wedge  Driver Expansion Shell Yield Tube
  Contact Now
High Strength Anchor Cable Bolt FunctionsCompared with the common rock bolt,High Strength Anchor Cable Bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity, and could prevent the lateral movement of strata.High Strength Anchor Cable Bolt  Features&AdvantagesHigh Strength Anchor Cable BoltSingle strand or twin strand options availableFish hooks fitted to top of cables for retention prior to groutingResin can be used for instant anchoring,while grout for permanent support                 High Str
  Contact Now
Bulb Anchor Cable Bolt FunctionsBulb Anchor Cable Bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity, and could prevent the lateral movement of strata.Bulb Anchor Cable Bolt Features&AdvantagesPlain cable bolt and bulb cable boltThe bulbs can be modified in frequency and diameter based on customer’s request, the diameter is 21mm~38mmAt the top of the Bulb Anchor Cable Bolt, three bulbs to reinforce resin mixing, achieve point anchorage and pretensionFish hooks fitted to top of cables for retention prior to groutingAvailable in single strand
  Contact Now
Friction Anchor FunctionsFriction Anchor is a frictional ground support system.
  Contact Now
Friction Anchor Ground Control FunctionsFriction Anchor Ground Control is a frictional ground support system.
  Contact Now
Mining Water Swelling Anchor Key FeaturesInstallation is rapid and effortlessRemains stable despite blasting vibrations and varying rock strengthsNo resin or grout is necessaryDelivers immediate structural supportBoasts an extensive expansion range, ensuring even load distribution along the hole                                                   &nb
  Contact Now
Ordinary Expansion Bolt Swellex Type Key FeaturesInstallation is rapid and effortlessNo resin or grout is necessaryRemains stable despite blasting vibrations and varying rock strengthsBoasts an extensive expansion range, ensuring even load distribution along the holeDelivers immediate structural support                                                Two designs o
  Contact Now
Friction Anchor Ground Support FunctionsFriction Anchor Ground Support is a frictional ground support system.
  Contact Now
Key FeaturesQuick and easy to installNo resin or grout requiredNot affected by blasting vibrations and rock strengthWide expansion range and load distributed evenly over entire length of holeProvides immediate support                        Two designs of Upgrade Expansion Bolt Swellex Type> Upgrade Expansion Bolt Swellex Type> New improved Bolt with non-return valve which limits "spring-back" giving increased pull-out resistance and keeps high strength expansion.Item DescriptionTube Thickness(mm)Inflated Bolt Dia
  Contact Now
Hydrabolts Key FeaturesInstallation is rapid and effortlessNo resin or grout is necessaryRemains stable despite blasting vibrations and varying rock strengthsBoasts an extensive expansion range, ensuring even load distribution along the holeDelivers immediate structural support                                       Two designs of Hydrabolts> Hydrabolts> New improved Bolt with non-return valve which li
  Contact Now
Yielding Cable Bolt FunctionsYielding Cable Bolts could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity,and could prevent the lateral movement of strata.Yielding Cable Bolt AccessoriesFish HooksExpansion shellBarrel&wedgeGrouting tubeBreathing tubeBearing plate                 Yielding Cable Bolt ApplicationMinesTunnelsSlopesPlaces where need ground supportYielding Cable Bolt Length & PackageLength:500mm to 6200mm in pieces or in coilsPackage:20 pcs each bundleAs customer’s require
  Contact Now
Key FeaturesLow-cost and high-capacity supportTwin-strand of 15.2mm cable secured by 6.3mm wireSimple design, easy for installationLengths are available up to 12mAvailable in black or hot dip galvanizedMechanical PropertiesProperties15.2mmMinimumTypicalNorminal Strand Diameter15.2mmStrand1x7Cross-Sectional Steel Area143m㎡Mass Per Meter1.13kgYield Load at 1% Extension234.6kN250kNTensile Strength260kN265-270kNElongation on 600mm Gauge Length3.5%6.5%AccessoriesPlate, Barrel&WedgePackageBundle sizes to suit the customer, generally pack of 50pcs
  Contact Now
Flat plate 200x200x8 for Cable Bolt SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFlat plate 200x200x8 for Cable Bolt Features&Advantages        Custom sizes are available to meet specific customer needs.                Ideal for use in mines with low overhead space.           
  Contact Now
FunctionsCable bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity, and could prevent the lateral movement of strata.Features&AdvantagesPlain cable bolt and bulb cable boltAt the top of the bulb cable bolt, three bulbs to reinforce resin mixing, achieve point anchorage and pretensionThe bulbs can be modified in frequency and diameter based on customer’s request, the diameter is 21mm~38mmPlain or bulbs options available,bulbs available at either 0.5 m or 1 m spacing Available in single strand or twin strandFish hooks fitted to top of cables fo
  Contact Now
Plain Cable Bolt FunctionsCable bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity, and could prevent the lateral movement of strata.Plain Cable Bolt Features&AdvantagesPlain cable bolt Available in single strand or twin strandFish hooks fitted to top of cables for retention prior to groutingResin could be applied for immediate point anchorage and grout for permanent support                 Plain Cable Bolt Mechanical PropertiesItem No.TRCB152TRCB178TRCB189TRCB216TRCB218Diameter(mm)15.217.818.921.
  Contact Now
Flat plate for Cable Bolt SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFlat plate for Cable Bolt Features&Advantages               Custom sizes can be provided according to the specific needs of customers.                Suitable for mines with limited overhead space.     &nb
  Contact Now
Flat Plate 150x150x12 For Cable Bolt SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFlat Plate 150x150x12 For Cable Bolt Features&Advantages    Custom dimensions can be tailored to satisfy individual customer needs.        Designed for mining environments where overhead space is restricted.        Well-suited for deployment on mostly level rock format
  Contact Now
X Pandabolt Key FeaturesInstallation is rapid and effortlessNo resin or grout is necessaryRemains stable despite blasting vibrations and varying rock strengthsBoasts an extensive expansion range, ensuring even load distribution along the holeDelivers immediate structural support                                           Two designs of X Pandabolt> X Pandabolt> New improved Bolt wit
  Contact Now
Functions:It  is an effective rock reinforcement system for underground roof support.  If there is rock mass deformation, the paddle part will be worked as  anchor points to bear the load and smooth section will absorb energy to  prevent rock fall.Features&Advantages:1.After fully grouted in the bore hole, the paddle part will work as anchor points.
  Contact Now
Galvanized Split Set Bolt  FunctionsFriction Anchor Ground Support is a frictional ground support system.
  Contact Now
Swellex MN12 Key FeaturesInstallation is effortless, requiring no resin or grout.Stable despite vibrations and varying rock strengths.Extensive expansion range ensures even load distribution.Immediate structural support upon installation.                               Two designs of Swellex MN12> Swellex MN12> New improved Bolt with non-return valve which limits "spring-back" giving increased pull-out resistance and keeps high str
  Contact Now
Relate News
Abstract: Laboratory pull-out tests were conducted on the following rock bolts and cable bolts: steel rebars, smooth steel bars, fiberglass reinforced polymer threaded bolts, flexible cable bolts, IR5/IN special cable bolts and Mini-cage cable bolts. The diameter of the tested bolts was between 16 mm and 26 mm. The bolts were grouted in a sandstone sample using resin or cement grouts. The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.
In "Comparative Study of the Shear Test Results of a Cable Bolt on Three Laboratory Test Apparatuses," researchers delved deeply into the crucial role of cable bolts in rock reinforcement and provided a more profound understanding of their shear performance by comparing different laboratory test methods.
Fig. 1 Stress fracturing and a bolt exposed on an advance face in a cut-and-fill mine stope. Note the locus of the stress-induced fractures Fig. 2 A rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to shear loads and deviated from its original hole trace. The thick arrows point the direction of possible shear movements in the rockFig. 3 A failed rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to both pull and shear loads prior to failure.
Abstract Rock bolts used for the reinforcement of underground mines, tunnels, and nuclear waste repositories are made up of low and medium-carbon steels, and high-strength low alloy steels. Typical rock bolt systems used for rock reinforcement are mechanically anchored bolts, grout anchored, frictional rock stabilizers and strand anchors.
Having sponsored AusIMM for three years, Tonry Australia was excited to attend the 2023 AusIMM NWQ Branch Regional Mining Conference in Mount Isa on 8th September 2023
Tonry participated in the AIMEX EXPO, Sydney International Mining Exhibition from September 5th to 7th, 2023.
Tonry participated in the EXTEMIN PERUMIN, Peru Arequipa International Mining Exhibition from September 25th to 29th, 2023.