Friction Stabilizer Ground Support-manufacture,factory,supplier from China

(Total 24 Products for Friction Stabilizer Ground Support)
Friction Stabilizer Ground Support FunctionsFriction Stabilizer Ground Support is a frictional ground support system.
  Contact Now
Friction Stabilizer Ground Control FunctionsFriction Stabilizer Ground Control is a frictional ground support system.
  Contact Now
Friction Stabilizer FunctionsFriction Stabilizer is a frictional ground support system.
  Contact Now
Friction Stabilizer BoltFriction Stabilizer Bolt is a frictional ground support system.
  Contact Now
Friction-Lok Stabilizer FunctionsSplit Set is a frictional ground support system.When friction bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces on rock roof surface along the whole length and firmly holds the rock. Friction-Lok Stabilizer Features&AdvantagesMade from high-strength steel band  Immediate frictional Support in axial and radialIndependent support without plateEasy for installationSimple design, cost-savingAvailable in black, cold galvanizing, or hot dip galvanizedFriction
  Contact Now
Split Set Ground Support FunctionsSplit Set Ground Support is a frictional ground support system.
  Contact Now
Friction Anchor Ground Support FunctionsFriction Anchor Ground Support is a frictional ground support system.
  Contact Now
Friction Bolt Ground Support FunctionsFriction Bolt Ground Support is a frictional ground support system.
  Contact Now
Functions:Being used with face plate, domed ball,anti-friction washer and nut.Full treadbar bolt can be an effective rock reinforcement system for ground support.                     Features&Advantages:Available in left hand or right hand tread.Higher thread ribs mix resin better and improve anchorage.Suitable for using with either resin cartridges or cement grout.It has equal strength on the entire length.Due to continuous thread on entire length. the nut can be fastened upward at any place.
  Contact Now
Friction Anchor Ground Control FunctionsFriction Anchor Ground Control is a frictional ground support system.
  Contact Now
Friction Bolt Ground Control FunctionsFriction Bolt(Ground Control) is a frictional ground support system.When Friction Bolt(Ground Control) is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radical forces on rock roof surface along the whole length and firmly holds the rock. Friction Bolt Ground Control Features&AdvantagesMade from high-strength steel band  Immediate frictional Support in axial and radialIndependent support without platesEasy for installationSimple design, cost-savingAvailable in black,
  Contact Now
Friction Anchor FunctionsFriction Anchor is a frictional ground support system.
  Contact Now
Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5. Customised sheets available with double or additional wires if requested.6+6.
  Contact Now
Split Set Ground Support FunctionsSplit Set is a frictional ground support system.When friction bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces on rock roof surface along the whole length and firmly holds the rock. Split Set Ground Support Features&Advantages    Constructed from durable, high-strength steel banding.        Provides instant frictional support both axially and radially.       &nbs
  Contact Now
Friction Bolt For Mine Rodway Support FunctionsFriction Bolt For Mine Rodway Support with only 2 parts, a tube and matching domed bearing plate. The high strength steel tube is slotted along its length. One end is tapered for easy insertion into a drill hole and the other has a welded ring flange to hold the bearing plate. With the bearing plate in place, the tube is driven into a slightly smaller hole, using the same standard percussion drill that made the hole.
  Contact Now
33mm Friction Bolt Functions33mm Friction Bolt  is a frictional ground support system.
  Contact Now
Friction Bolt-33-1800mm FunctionsFriction Bolt-33-1800mm is a frictional ground support system.
  Contact Now
Friction Bolt-47-1800mm FunctionsFriction Bolt-47-1800mm Friction bolt is a frictional ground support system.
  Contact Now
Friction Bolt-39-2000mm FunctionsFriction Bolt-39-2000mm is a frictional ground support system.
  Contact Now
Friction Bolt-47-2400mm FunctionsFriction Bolt-47-2400mm is a frictional ground support system.
  Contact Now
Friction Bolt-47-3000mm FunctionsFriction Bolt-47-3000mm is a frictional ground support system.
  Contact Now
Friction Bolt-47-900mm FunctionsFriction Bolt-47-900mm is a frictional ground support system.
  Contact Now
Friction Bolt -33-600mm FunctionsFriction Bolt -33-600mm is a frictional ground support system.
  Contact Now
Friction Bolt-39-2400mm FunctionsFriction Bolt-39-2400mm is a frictional ground support system.
  Contact Now
Relate News
In "Comparative Study of the Shear Test Results of a Cable Bolt on Three Laboratory Test Apparatuses," researchers delved deeply into the crucial role of cable bolts in rock reinforcement and provided a more profound understanding of their shear performance by comparing different laboratory test methods.
Fig. 1 Stress fracturing and a bolt exposed on an advance face in a cut-and-fill mine stope. Note the locus of the stress-induced fractures Fig. 2 A rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to shear loads and deviated from its original hole trace. The thick arrows point the direction of possible shear movements in the rockFig. 3 A failed rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to both pull and shear loads prior to failure.
Abstract Rock bolts used for the reinforcement of underground mines, tunnels, and nuclear waste repositories are made up of low and medium-carbon steels, and high-strength low alloy steels. Typical rock bolt systems used for rock reinforcement are mechanically anchored bolts, grout anchored, frictional rock stabilizers and strand anchors.
Abstract: Laboratory pull-out tests were conducted on the following rock bolts and cable bolts: steel rebars, smooth steel bars, fiberglass reinforced polymer threaded bolts, flexible cable bolts, IR5/IN special cable bolts and Mini-cage cable bolts. The diameter of the tested bolts was between 16 mm and 26 mm. The bolts were grouted in a sandstone sample using resin or cement grouts. The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.
Tonry participated in the EXTEMIN PERUMIN, Peru Arequipa International Mining Exhibition from September 25th to 29th, 2023.
Having sponsored AusIMM for three years, Tonry Australia was excited to attend the 2023 AusIMM NWQ Branch Regional Mining Conference in Mount Isa on 8th September 2023
Tonry participated in the AIMEX EXPO, Sydney International Mining Exhibition from September 5th to 7th, 2023.