Galvanized Friction Lok Anchor-manufacture,factory,supplier from China

(Total 24 Products for Galvanized Friction Lok Anchor)
Friction Anchor FunctionsFriction Anchor is a frictional ground support system.
  Contact Now
Friction-Lok Stabilizer FunctionsSplit Set is a frictional ground support system.When friction bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces on rock roof surface along the whole length and firmly holds the rock. Friction-Lok Stabilizer Features&AdvantagesMade from high-strength steel band  Immediate frictional Support in axial and radialIndependent support without plateEasy for installationSimple design, cost-savingAvailable in black, cold galvanizing, or hot dip galvanizedFriction
  Contact Now
Friction Anchor Ground Control FunctionsFriction Anchor Ground Control is a frictional ground support system.
  Contact Now
Friction Anchor Ground Support FunctionsFriction Anchor Ground Support is a frictional ground support system.
  Contact Now
Galvanized Split Set Bolt  FunctionsFriction Anchor Ground Support is a frictional ground support system.
  Contact Now
Flat Plate Galvanized SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFlat Plate Galvanized Features&Advantages               Custom sizes can be provided according to the specific needs of customers.                Suitable for mines with limited overhead space.       
  Contact Now
High Strength Anchor Cable Bolt FunctionsCompared with the common rock bolt,High Strength Anchor Cable Bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity, and could prevent the lateral movement of strata.High Strength Anchor Cable Bolt  Features&AdvantagesHigh Strength Anchor Cable BoltSingle strand or twin strand options availableFish hooks fitted to top of cables for retention prior to groutingResin can be used for instant anchoring,while grout for permanent support                 High Str
  Contact Now
Domed Plate Galvanized SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRDP12012040.45YTRDP12512540.49YTRDP15015040.71YTRDP15015050.88YTRDP15015061.06YTRDP15015081.42YTRDP150150122.12NTRDP20020041.26YTRDP20020051.57YTRDP20020082.51NTRDP200200103.14NTRDP200200123.77NTRDP200200144.40NTRDP200200165.02NDomed Plate Galvanized Features&Advantages       Custom sizes can be provided according to customer specifications                The dome design significan
  Contact Now
Bulb Anchor Cable Bolt FunctionsBulb Anchor Cable Bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity, and could prevent the lateral movement of strata.Bulb Anchor Cable Bolt Features&AdvantagesPlain cable bolt and bulb cable boltThe bulbs can be modified in frequency and diameter based on customer’s request, the diameter is 21mm~38mmAt the top of the Bulb Anchor Cable Bolt, three bulbs to reinforce resin mixing, achieve point anchorage and pretensionFish hooks fitted to top of cables for retention prior to groutingAvailable in single strand
  Contact Now
Galvanized Star Plate SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRSP1501504TRSP1501505TRSP1501506TRSP2002004TRSP2002005TRSP2002006Galvanized Star Plate Features&Advantages        Offered with a dog ear feature for suspending service lines                Designed with rounded corners to minimize mesh damage during loading                The dome shape allows for 18° alignment angl
  Contact Now
Wire Mesh Galvanized Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Customised sheets available with double or additional wires if requested.  4. Suitable for shotcrete applications.5.
  Contact Now
Mining Water Swelling Anchor Key FeaturesInstallation is rapid and effortlessRemains stable despite blasting vibrations and varying rock strengthsNo resin or grout is necessaryDelivers immediate structural supportBoasts an extensive expansion range, ensuring even load distribution along the hole                                                   &nb
  Contact Now
Combi plate GalvanizedPlate TypeCombi TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRCPTop Plate15015072.17YBottom Plate3002802NTRCPTop Plate15015052.34YBottom Plate3002802NTRCPTop Plate15015062.51YBottom Plate3002802NCombi plate Galvanized Features&AdvantagesAlternate sizes also available as customer’s requirement.Used with flat plate or domed plate to increase support capacity.Two separate plates combine together for one time installation.Enlarge contact surface area to increase the support effect.Long hole is used for hanging of service lines.Available in bla
  Contact Now
Round Plate For Friction Bolt SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRRP2002004TRRP2002005TRRP2002006TRRP2002008TRRP20020010TRRP1501504TRDP1501506Alternate sizes also available as customer’s requirement.Available in black or hot dip galvanized. Round Plate For Friction Bolt Features&Advantages               Custom sizes can be provided according to the specific needs of customers.                Suitable for mines with
  Contact Now
Functions:It  is an effective rock reinforcement system for underground roof support.  If there is rock mass deformation, the paddle part will be worked as  anchor points to bear the load and smooth section will absorb energy to  prevent rock fall.Features&Advantages:1.After fully grouted in the bore hole, the paddle part will work as anchor points.
  Contact Now
Friction Stabilizer FunctionsFriction Stabilizer is a frictional ground support system.
  Contact Now
Friction Stabilizer Ground Support FunctionsFriction Stabilizer Ground Support is a frictional ground support system.
  Contact Now
Friction Stabilizer Ground Control FunctionsFriction Stabilizer Ground Control is a frictional ground support system.
  Contact Now
Mesh Strap Key Features:1.High energy absorbing.2.Allows for movement without weakening the integral mesh strength.3.Pig tail cross wire design allows for multiple take upon bolts.4.Available in black or hot dip galvanized.
  Contact Now
SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRRP2002004TRRP2002005TRRP2002006TRRP2002008TRRP20020010TRRP1501504TRDP1501506Alternate sizes also available as customer’s requirement.Available in black or hot dip galvanized. PackageRound plates are packed with wire slips, plywood box, steel pallets & wrapping films.
  Contact Now
33mm Friction Bolt Functions33mm Friction Bolt  is a frictional ground support system.
  Contact Now
Friction Stabilizer BoltFriction Stabilizer Bolt is a frictional ground support system.
  Contact Now
39mm Friction bolt Functions39mm Friction bolt (Split sets) is a frictional ground support system.
  Contact Now
47mm Friction bolt Functions47mm Friction bolt (Split sets) is a frictional ground support system.
  Contact Now
Relate News
In "Comparative Study of the Shear Test Results of a Cable Bolt on Three Laboratory Test Apparatuses," researchers delved deeply into the crucial role of cable bolts in rock reinforcement and provided a more profound understanding of their shear performance by comparing different laboratory test methods.
Abstract: Laboratory pull-out tests were conducted on the following rock bolts and cable bolts: steel rebars, smooth steel bars, fiberglass reinforced polymer threaded bolts, flexible cable bolts, IR5/IN special cable bolts and Mini-cage cable bolts. The diameter of the tested bolts was between 16 mm and 26 mm. The bolts were grouted in a sandstone sample using resin or cement grouts. The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.
Fig. 1 Stress fracturing and a bolt exposed on an advance face in a cut-and-fill mine stope. Note the locus of the stress-induced fractures Fig. 2 A rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to shear loads and deviated from its original hole trace. The thick arrows point the direction of possible shear movements in the rockFig. 3 A failed rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to both pull and shear loads prior to failure.
Abstract Rock bolts used for the reinforcement of underground mines, tunnels, and nuclear waste repositories are made up of low and medium-carbon steels, and high-strength low alloy steels. Typical rock bolt systems used for rock reinforcement are mechanically anchored bolts, grout anchored, frictional rock stabilizers and strand anchors.
Having sponsored AusIMM for three years, Tonry Australia was excited to attend the 2023 AusIMM NWQ Branch Regional Mining Conference in Mount Isa on 8th September 2023
Tonry participated in the EXTEMIN PERUMIN, Peru Arequipa International Mining Exhibition from September 25th to 29th, 2023.
Tonry participated in the AIMEX EXPO, Sydney International Mining Exhibition from September 5th to 7th, 2023.