Hot Ribbed Steel-manufacture,factory,supplier from China

(Total 24 Products for Hot Ribbed Steel)
Steel Reabar Functions:Being used with a face plate, domed ball, and nut.Resin Bolt can be an effective rock reinforcement system for ground support.                                        Steel Reabar Features&Advantages:Available in left hand or right hand tread.Suitable for using with either resin cartridges or cement grout.Higher thread ribs mix resin better and improve anchorage.Due to continuous thread on entire length.
  Contact Now
Black Steel Star Plate SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRSP1501504TRSP1501505TRSP1501506TRSP2002004TRSP2002005TRSP2002006Black Steel Star Plate Features&Advantages        Offered with a dog ear feature for suspending service lines                Designed with rounded corners to minimize mesh damage during loading                The dome shape allows for 18° alignment an
  Contact Now
Coal Mine Steel Welded Wire Mesh Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5. Customised sheets available with double or additional wires if requested.6+6.
  Contact Now
Key Features1. High strength alloyed steel.2. Used with rock bolts and mesh to provide extra support.3. Enlarge contact surface area to increase the support effect.4. Alternate sizes also available as customer’s requirements.5. Available in black or hot dip galvanized.Length (mmWidth (mm)Thickness (mm)Dia of hole (mm)1500220230 for round hole2000230430*60 and 30*70mm for long hole 30002806.........Packaging1. Steel or Fiber strapping.2. Bundle sizes to suit the customer, generally packs of 20pcs.
  Contact Now
W Roof Mat Key FeaturesHigh-strength alloyed steel construction.Designed for use with rock bolts and mesh for enhanced support.Increases contact surface area to improve support effectiveness.Custom sizes can be made available to meet specific customer needs.Offered in either black or hot-dip galvanized finishes.W Roof Mat Mechanical PropertiesLength(mm)Width(mm)Thickness(mm)Dia of hole(mm)1500220230 for round hole2000230430*60 and 30*70mm for long hole30002806.........W Roof Mat Packaging1. Steel or Fiber strapping.2.
  Contact Now
SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRRP2002004TRRP2002005TRRP2002006TRRP2002008TRRP20020010TRRP1501504TRDP1501506Alternate sizes also available as customer’s requirement.Available in black or hot dip galvanized. PackageRound plates are packed with wire slips, plywood box, steel pallets & wrapping films.
  Contact Now
Key FeaturesMade of hot rolled reinforcing bar which has rib deformationThe Solid Deformed Bar has a standard rolled thread at one endSuitable for using with either resin capsule or groutDiameter 16mm/18mm/20mm/24mm can be suppliedAvailable in black or hot dip galvanizedMechanical Properties-24mmPropertiesMinimumTypicalYield Strength500MPa245kN540MPa260kNTensile Strength630MPa308kN665MPa327kNElongation A%15%20%Mass Per Meter3.61kgsCross Sectional Area460m㎡Bar Core Diameter24.2mmMajor Bar Diameter27.2mRolled ThreadM24X3.0 PitchNut Breakout Torque140-175NmNotes: Tensile strength of thread e
  Contact Now
Key FeaturesLow-cost and high-capacity supportTwin-strand of 15.2mm cable secured by 6.3mm wireSimple design, easy for installationLengths are available up to 12mAvailable in black or hot dip galvanizedMechanical PropertiesProperties15.2mmMinimumTypicalNorminal Strand Diameter15.2mmStrand1x7Cross-Sectional Steel Area143m㎡Mass Per Meter1.13kgYield Load at 1% Extension234.6kN250kNTensile Strength260kN265-270kNElongation on 600mm Gauge Length3.5%6.5%AccessoriesPlate, Barrel&WedgePackageBundle sizes to suit the customer, generally pack of 50pcs
  Contact Now
SpecificationsPlate TypeLength (mm)Width(mm)Thickness(mm)Unit weight (kg)Dog earTRFP150150122.12NTRFP20020041.26NTRFP20020082.51NTRFP200200123.77NTRFP200200144.40NTRFP200200165.02NFeatures&AdvantagesAlternate sizes also available as customer’s requirementUsed in mine with low headroomUsed in relatively flat rock surfaceUsed in where little or no angularity neededMuti-holes plate is available to fix the breather tube and grout tube used with cable boltsAvailable in black or hot dip galvanizedPackageFlat plates are packed with plywood box, steel pallets & wrapping films. 
  Contact Now
Ω Roof Mat Key FeaturesConstructed from high-strength alloyed steel.Pairs with rock bolts and mesh for enhanced support.Designed to expand the contact surface area, amplifying the support provided.Offered in various sizes to meet specific customer needs.Offered with a choice of black or hot-dip galvanized finish.Ω Roof Mat Mechanical PropertiesLength (mm)Width (mm)Thickness (mm)Dia of hole (mm)1500220230 for round hole2000230430*60 and 30*70mm for long hole 30002806.........Ω Roof Mat Packaging1. Steel or Fiber strapping.2.
  Contact Now
 M Roof Mat Key FeaturesMade from high-strength alloyed steel.Pairs with rock bolts and mesh for enhanced support.Designed to increase the support effect by enlarging the contact surface area.Customizable in various sizes to meet specific customer needs.Offered in either black or hot-dip galvanized finishes.Length (mmWidth (mm)Thickness (mm)Dia of hole (mm)1500220230 for round hole2000230430*60 and 30*70mm for long hole 30002806......... M Roof Mat Packaging1. Steel or Fiber strapping.2. Bundle sizes to suit the customer, generally packs of 20pcs.
  Contact Now
Friction-Lok Stabilizer FunctionsSplit Set is a frictional ground support system.When friction bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces on rock roof surface along the whole length and firmly holds the rock. Friction-Lok Stabilizer Features&AdvantagesMade from high-strength steel band  Immediate frictional Support in axial and radialIndependent support without plateEasy for installationSimple design, cost-savingAvailable in black, cold galvanizing, or hot dip galvanizedFriction
  Contact Now
Friction Bolt-33-1200mm FunctionsFriction Bolt-33-1200mm is a frictional ground support system.When bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces on rock roof surface along the whole length and firmly holds the rock.Friction Bolt-33-1200mm Features&AdvantagesMade from high strength steel band  Independent supporting without plateEasy for installationImmediate frictional Support in axial and radialSimple design,cost savingAvailable in black,cold galvanizing or hot dip galvanizedFric
  Contact Now
Friction Bolt-47-1500mm FunctionsFriction Bolt-47-1500mm is a frictional ground support system.When friction bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces  on rock roof surface along the whole length and firmly holds the rock.Friction Bolt-47-1500mm Features&AdvantagesMade from high strength steel band  Immediate frictional Support in axial and radialIndependent supporting without plateEasy for installationSimple design,cost savingAvailable in black,cold galvanizing or hot dip galv
  Contact Now
42mm Friction bolt Functions42mm Friction bolt (Split sets) is a frictional ground support system.When 42mm Friction bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces on rock roof surface along the whole length and firmly holds the rock.Features&AdvantagesAvailable in black,cold galvanizing or hot dip galvanizedMade from high strength steel band  Independent supporting without plateEasy for installationSimple design,cost savingImmediate frictional Support in axial and radial
  Contact Now
Friction Rock Bolt FunctionsSplit Set is a frictional ground support system.When friction bolt is inserted into drilling hole with smaller diameter, the slot partially closes and bolt diameter is compressed, which creates radial forces  on rock roof surface along the whole length and firmly holds the rock. Friction Rock Bolt Features&AdvantagesMade from high-strength steel band  Immediate frictional Support in axial and radialIndependent support without plateEasy for installationSimple design, cost-savingAvailable in black, cold galvanizing, or hot dip galvanizedFriction Roc
  Contact Now
Mesh Strap Key Features:1.High energy absorbing.2.Allows for movement without weakening the integral mesh strength.3.Pig tail cross wire design allows for multiple take upon bolts.4.Available in black or hot dip galvanized.
  Contact Now
SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRMP2002004TRMP2002005TRMP2002006TRMP1501504TRMP1501506      Alternate sizes also available as customer’s requirements.Welded nut of any size to thread onto existing installed rock bolts.Available in black or hot dip galvanized.                     PackageMesh plate are packed with plywood box.          
  Contact Now
Key Features:1. Manufactured from high strength full threadbar with a hot forged integral head on one end and the other end has expansion shell.2. Available in left hand or right hand thread.3. Provide the same tensile strength on the entire length.4. Expansion shell bolt with integral head, they are suitable for use in areas where roof is low or when long bolts tails are undesirable.5. Nominal diameter 16mm/18mm/20mm can be supplied.6.
  Contact Now
Combi platePlate TypeCombi TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRCPTop Plate15015072.17YBottom Plate3002802NTRCPTop Plate15015052.34YBottom Plate3002802NTRCPTop Plate15015062.51YBottom Plate3002802NFeatures&AdvantagesAlternate sizes also available as customer’s requirement.Used with flat plate or domed plate to increase support capacity.Two separate plates combine together for one time installation.Enlarge contact surface area to increase the support effect.Long hole is used for hanging of service lines.Available in black or hot dip galvanized.PackageCo
  Contact Now
Wire Mesh Strap Support Features:1.High energy absorbing.2.Pig tail cross wire design allows for multiple take upon bolts.3.Allows for movement without weakening the integral mesh strength.4.The longitudinal wire strand is able to slip under load conditions through the  cross wires to distribute load over several bolts.5.Available in black or hot dip galvanized.
  Contact Now
Round Plate For Friction Bolt SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRRP2002004TRRP2002005TRRP2002006TRRP2002008TRRP20020010TRRP1501504TRDP1501506Alternate sizes also available as customer’s requirement.Available in black or hot dip galvanized. Round Plate For Friction Bolt Features&Advantages               Custom sizes can be provided according to the specific needs of customers.                Suitable for mines with
  Contact Now
Combi Plate Black Plate TypeCombi TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRCPTop Plate15015072.17YBottom Plate3002802NTRCPTop Plate15015052.34YBottom Plate3002802NTRCPTop Plate15015062.51YBottom Plate3002802NCombi Plate Black Features&AdvantagesAlternate sizes also available as customer’s requirement.Two separate plates combine together for one time installation.Used with flat plate or domed plate to increase support capacity.Long hole is used for hanging of service lines.Enlarge contact surface area to increase the support effect.Available in black or hot
  Contact Now
Key Features:1.High energy absorbing.2.Allows for movement without weakening the integral mesh strength.3.The longitudinal wire strand is able to slip under load conditions through the  cross wires to distribute load over several bolts.4.Pig tail cross wire design allows for multiple take upon bolts.5.Available in black or hot dip galvanized.            PropertiesTechnical SpecificantionLongitudinal Wire Diameter10mmCross Wire Diameter6mmNominal Length6000mmNorminal Width300mmWire Aperture75mmx150mmYield Strength of Wire400MPa MIN
  Contact Now
Relate News
Abstract: Laboratory pull-out tests were conducted on the following rock bolts and cable bolts: steel rebars, smooth steel bars, fiberglass reinforced polymer threaded bolts, flexible cable bolts, IR5/IN special cable bolts and Mini-cage cable bolts. The diameter of the tested bolts was between 16 mm and 26 mm. The bolts were grouted in a sandstone sample using resin or cement grouts. The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.
In "Comparative Study of the Shear Test Results of a Cable Bolt on Three Laboratory Test Apparatuses," researchers delved deeply into the crucial role of cable bolts in rock reinforcement and provided a more profound understanding of their shear performance by comparing different laboratory test methods.
Fig. 1 Stress fracturing and a bolt exposed on an advance face in a cut-and-fill mine stope. Note the locus of the stress-induced fractures Fig. 2 A rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to shear loads and deviated from its original hole trace. The thick arrows point the direction of possible shear movements in the rockFig. 3 A failed rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to both pull and shear loads prior to failure.
Abstract Rock bolts used for the reinforcement of underground mines, tunnels, and nuclear waste repositories are made up of low and medium-carbon steels, and high-strength low alloy steels. Typical rock bolt systems used for rock reinforcement are mechanically anchored bolts, grout anchored, frictional rock stabilizers and strand anchors.
Having sponsored AusIMM for three years, Tonry Australia was excited to attend the 2023 AusIMM NWQ Branch Regional Mining Conference in Mount Isa on 8th September 2023
Tonry participated in the EXTEMIN PERUMIN, Peru Arequipa International Mining Exhibition from September 25th to 29th, 2023.
Tonry participated in the AIMEX EXPO, Sydney International Mining Exhibition from September 5th to 7th, 2023.