Sandwich System-manufacture,factory,supplier from China

(Total 24 Products for Sandwich System)
SpecificationSandwich system is used for buffering and releasing the pressure of the rocks to protect the bolts from damaging and breaking. It could increase the elongation of the bolts.Especially match with cable bolts to form a high tensile strength,high elongation and high anti-shearing capacity support system.This system is also match with Full threadbar bolt,Grooved bolt,Sharp end bolt,Slot&wedge bolt and so on.Please contact us if more details.
  Contact Now
Friction Stabilizer Ground Control FunctionsFriction Stabilizer Ground Control is a frictional ground support system.
  Contact Now
Split Set Ground Support FunctionsSplit Set Ground Support is a frictional ground support system.
  Contact Now
Friction Anchor FunctionsFriction Anchor is a frictional ground support system.
  Contact Now
Friction Stabilizer Ground Support FunctionsFriction Stabilizer Ground Support is a frictional ground support system.
  Contact Now
Friction Stabilizer FunctionsFriction Stabilizer is a frictional ground support system.
  Contact Now
FunctionsFriction Bolt -42-1800mm is a frictional ground support system.
  Contact Now
Friction Anchor Ground Control FunctionsFriction Anchor Ground Control is a frictional ground support system.
  Contact Now
Friction Stabilizer BoltFriction Stabilizer Bolt is a frictional ground support system.
  Contact Now
Friction Bolt-33-1800mm FunctionsFriction Bolt-33-1800mm is a frictional ground support system.
  Contact Now
Friction Anchor Ground Support FunctionsFriction Anchor Ground Support is a frictional ground support system.
  Contact Now
Friction Bolt-39-2000mm FunctionsFriction Bolt-39-2000mm is a frictional ground support system.
  Contact Now
Steel Reabar Functions:Being used with a face plate, domed ball, and nut.Resin Bolt can be an effective rock reinforcement system for ground support.                                        Steel Reabar Features&Advantages:Available in left hand or right hand tread.Suitable for using with either resin cartridges or cement grout.Higher thread ribs mix resin better and improve anchorage.Due to continuous thread on entire length.
  Contact Now
Friction Bolt -33-600mm FunctionsFriction Bolt -33-600mm is a frictional ground support system.
  Contact Now
Friction Bolt-47-3000mm FunctionsFriction Bolt-47-3000mm is a frictional ground support system.
  Contact Now
Friction Bolt-47-900mm FunctionsFriction Bolt-47-900mm is a frictional ground support system.
  Contact Now
Friction Bolt-47-2400mm FunctionsFriction Bolt-47-2400mm is a frictional ground support system.
  Contact Now
Functions:Being used with face plate, domed ball,anti-friction washer and nut, Full threadbar bolt can be an effective rock reinforcement system for underground rock support.
  Contact Now
Friction Bolt-39-2400mm FunctionsFriction Bolt-39-2400mm is a frictional ground support system.
  Contact Now
Friction Bolt Ground Support FunctionsFriction Bolt Ground Support is a frictional ground support system.
  Contact Now
33mm Friction Bolt Functions33mm Friction Bolt  is a frictional ground support system.
  Contact Now
Friction Bolt-47-1800mm FunctionsFriction Bolt-47-1800mm Friction bolt is a frictional ground support system.
  Contact Now
Galvanized Split Set Bolt  FunctionsFriction Anchor Ground Support is a frictional ground support system.
  Contact Now
47mm Friction bolt Functions47mm Friction bolt (Split sets) is a frictional ground support system.
  Contact Now
Relate News
Abstract Rock bolts used for the reinforcement of underground mines, tunnels, and nuclear waste repositories are made up of low and medium-carbon steels, and high-strength low alloy steels. Typical rock bolt systems used for rock reinforcement are mechanically anchored bolts, grout anchored, frictional rock stabilizers and strand anchors.
In "Comparative Study of the Shear Test Results of a Cable Bolt on Three Laboratory Test Apparatuses," researchers delved deeply into the crucial role of cable bolts in rock reinforcement and provided a more profound understanding of their shear performance by comparing different laboratory test methods.
Fig. 1 Stress fracturing and a bolt exposed on an advance face in a cut-and-fill mine stope. Note the locus of the stress-induced fractures Fig. 2 A rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to shear loads and deviated from its original hole trace. The thick arrows point the direction of possible shear movements in the rockFig. 3 A failed rebar bolt exposed on the advance face of a cut-and-fill mine stope. The bolt was subject to both pull and shear loads prior to failure.
Abstract: Laboratory pull-out tests were conducted on the following rock bolts and cable bolts: steel rebars, smooth steel bars, fiberglass reinforced polymer threaded bolts, flexible cable bolts, IR5/IN special cable bolts and Mini-cage cable bolts. The diameter of the tested bolts was between 16 mm and 26 mm. The bolts were grouted in a sandstone sample using resin or cement grouts. The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.
Tonry participated in the EXTEMIN PERUMIN, Peru Arequipa International Mining Exhibition from September 25th to 29th, 2023.
Having sponsored AusIMM for three years, Tonry Australia was excited to attend the 2023 AusIMM NWQ Branch Regional Mining Conference in Mount Isa on 8th September 2023
Tonry participated in the AIMEX EXPO, Sydney International Mining Exhibition from September 5th to 7th, 2023.