Weld Osro strap-manufacture,factory,supplier from China

Weld Wire Mesh Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised sheets available with double or additional wires if requested.3. Suitable for shotcrete applications.4. Customised paint lines along the modules to suit roof bolt patterns.5.

Key Features:1.High energy absorbing.2.Allows for movement without weakening the integral mesh strength.3.The longitudinal wire strand is able to slip under load conditions through the  cross wires to distribute load over several bolts.4.Pig tail cross wire design allows for multiple take upon bolts.5.Available in black or hot dip galvanized.            PropertiesTechnical SpecificantionLongitudinal Wire Diameter10mmCross Wire Diameter6mmNominal Length6000mmNorminal Width300mmWire Aperture75mmx150mmYield Strength of Wire400MPa MIN

Mesh Strap Key Features:1.High energy absorbing.2.Allows for movement without weakening the integral mesh strength.3.Pig tail cross wire design allows for multiple take upon bolts.4.Available in black or hot dip galvanized.

Wire Mesh Strap Support Features:1.High energy absorbing.2.Pig tail cross wire design allows for multiple take upon bolts.3.Allows for movement without weakening the integral mesh strength.4.The longitudinal wire strand is able to slip under load conditions through the  cross wires to distribute load over several bolts.5.Available in black or hot dip galvanized.

Key FeaturesLow-cost and high-capacity supportTwin-strand of 15.2mm cable secured by 6.3mm wireSimple design, easy for installationLengths are available up to 12mAvailable in black or hot dip galvanizedMechanical PropertiesProperties15.2mmMinimumTypicalNorminal Strand Diameter15.2mmStrand1x7Cross-Sectional Steel Area143m㎡Mass Per Meter1.13kgYield Load at 1% Extension234.6kN250kNTensile Strength260kN265-270kNElongation on 600mm Gauge Length3.5%6.5%AccessoriesPlate, Barrel&WedgePackageBundle sizes to suit the customer, generally pack of 50pcs

Key FeaturesHigh ToughnessExtra High StrengthResin Anchored BoltProduct has been tested by SGS, WOLLONGONG UNIVERSITYMechanical Properties-22mmPropertiesMinimumTypicalYield Strength600MPa220kN650MPa240kNTensile Strength840MPa305kN920MPa340kNCalculated Sheat Strength240kN260kNElongation A%15%20%Charpy V-notch Impact27Joules Min Mass Per Meter2.98kgsCross Sectional Area370m㎡Bar Core Diameter21.7mmMajor Bar Diameter23.2mmRolled ThreadM24x3.0 PitchNut Breakout Torque130-170NmAccessoriesBearing plate,&nbs

Key FeaturesMade of hot rolled reinforcing bar which has rib deformationThe Solid Deformed Bar has a standard rolled thread at one endSuitable for using with either resin capsule or groutDiameter 16mm/18mm/20mm/24mm can be suppliedAvailable in black or hot dip galvanizedMechanical Properties-24mmPropertiesMinimumTypicalYield Strength500MPa245kN540MPa260kNTensile Strength630MPa308kN665MPa327kNElongation A%15%20%Mass Per Meter3.61kgsCross Sectional Area460m㎡Bar Core Diameter24.2mmMajor Bar Diameter27.2mRolled ThreadM24X3.0 PitchNut Breakout Torque140-175NmNotes: Tensile strength of thread e

Key Features1. Wire diameters, spacing and overall dimensions can be customised to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5. Customised sheets available with double or additional wires if requested.6.

Wire Mesh Mining Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5.

Key Features:1. Manufactured from high strength full threadbar with a hot forged integral head on one end and the other end has expansion shell.2. Available in left hand or right hand thread.3. Provide the same tensile strength on the entire length.4. Expansion shell bolt with integral head, they are suitable for use in areas where roof is low or when long bolts tails are undesirable.5. Nominal diameter 16mm/18mm/20mm can be supplied.6.

Mining Water Swelling Anchor Key FeaturesInstallation is rapid and effortlessRemains stable despite blasting vibrations and varying rock strengthsNo resin or grout is necessaryDelivers immediate structural supportBoasts an extensive expansion range, ensuring even load distribution along the hole                                                   &nb

Functions:It  is an effective rock reinforcement system for underground roof support.  If there is rock mass deformation, the paddle part will be worked as  anchor points to bear the load and smooth section will absorb energy to  prevent rock fall.Features&Advantages:1.After fully grouted in the bore hole, the paddle part will work as anchor points.

Steel Reabar Functions:Being used with a face plate, domed ball, and nut.Resin Bolt can be an effective rock reinforcement system for ground support.                                        Steel Reabar Features&Advantages:Available in left hand or right hand tread.Suitable for using with either resin cartridges or cement grout.Higher thread ribs mix resin better and improve anchorage.Due to continuous thread on entire length.

Coal Mine Steel Welded Wire Mesh Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5. Customised sheets available with double or additional wires if requested.6+6.

Ω Roof Mat Key FeaturesConstructed from high-strength alloyed steel.Pairs with rock bolts and mesh for enhanced support.Designed to expand the contact surface area, amplifying the support provided.Offered in various sizes to meet specific customer needs.Offered with a choice of black or hot-dip galvanized finish.Ω Roof Mat Mechanical PropertiesLength (mm)Width (mm)Thickness (mm)Dia of hole (mm)1500220230 for round hole2000230430*60 and 30*70mm for long hole 30002806.........Ω Roof Mat Packaging1. Steel or Fiber strapping.2.

 M Roof Mat Key FeaturesMade from high-strength alloyed steel.Pairs with rock bolts and mesh for enhanced support.Designed to increase the support effect by enlarging the contact surface area.Customizable in various sizes to meet specific customer needs.Offered in either black or hot-dip galvanized finishes.Length (mmWidth (mm)Thickness (mm)Dia of hole (mm)1500220230 for round hole2000230430*60 and 30*70mm for long hole 30002806......... M Roof Mat Packaging1. Steel or Fiber strapping.2. Bundle sizes to suit the customer, generally packs of 20pcs.

Combi platePlate TypeCombi TypeLength(mm)Width(mm)Thickness(mm)Unit weight(kg)Dog earTRCPTop Plate15015072.17YBottom Plate3002802NTRCPTop Plate15015052.34YBottom Plate3002802NTRCPTop Plate15015062.51YBottom Plate3002802NFeatures&AdvantagesAlternate sizes also available as customer’s requirement.Used with flat plate or domed plate to increase support capacity.Two separate plates combine together for one time installation.Enlarge contact surface area to increase the support effect.Long hole is used for hanging of service lines.Available in black or hot dip galvanized.PackageCo

Wire Mesh Galvanized Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Customised sheets available with double or additional wires if requested.  4. Suitable for shotcrete applications.5.

Mining Welded Wire Mesh Key FeaturesWire diameters, spacing, and dimensions can be customized to suit particular applications.Suitable for shotcrete applications.3. Customised sheets available with double or additional wires if requested.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5.

Wire Mesh Black Key Features1. Wire diameters, spacing, and dimensions can be customized to suit particular applications.2. Customised paint lines along the modules to suit roof bolt patterns.3. Suitable for shotcrete applications.4. Trimmed edges to ensure there is limited overhang of wire to cause injury when handling.5.

SpecificationsPlate TypeLength(mm)Width(mm)Thickness(mm)TRMP2002004TRMP2002005TRMP2002006TRMP1501504TRMP1501506      Alternate sizes also available as customer’s requirements.Welded nut of any size to thread onto existing installed rock bolts.Available in black or hot dip galvanized.                     PackageMesh plate are packed with plywood box.          

Functions:Being used with plate, domed ball,anti-friction washer and nut,Sharp end bolt can be an effective rock reinforcement system for unground rock support.                            Features&Advantages:1.Sharp end can break the resin cartridge easily to improve installation efficiency.2.With pin nut device, nut could help&n

EX Bolt Key FeaturesInstallation is rapid and effortlessNo resin or grout is necessaryRemains stable despite blasting vibrations and varying rock strengthsBoasts an extensive expansion range, ensuring even load distribution along the holeDelivers immediate structural support                                          Two designs of EX Bolt> EX Bolt> New improved Bolt with non-return valve

Resin Bolt Functions:Being used with a face plate, domed ball, and nut.Resin Bolt can be an effective rock reinforcement system for ground support.                                        Resin Bolt Features&Advantages:Available in left hand or right hand tread.Higher thread ribs mix resin better and improve anchorage.Suitable for using with either resin cartridges or cement grout.It has equal strength on the entire length.Due to continuous th