Bulbed Cable Bolt

Cable bolt is made of grade 1860Mpa steel wires,which can be made into plain cable bolt and bulbed cable bolt.
Contact Now E-Mail Telephone WhatsApp
Product Details

Functions

Cable bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity,

and could prevent the lateral movement of strata.


Features&Advantages

Plain cable bolt and bulb cable bolt

At the top of the bulb cable bolt, three bulbs to reinforce resin mixing, achieve point anchorage and pretension

The bulbs can be modified in frequency and diameter based on customer’s request, the diameter is 21mm~38mm

Plain or bulbs options available,bulbs available at either 0.5 m or 1 m spacing

Available in single strand or twin strand

Fish hooks fitted to top of cables for retention prior to grouting

Resin could be applied for immediate point anchorage and grout for permanent support

                   Bulbed Cable Bolt                     

Mechanical Properties


Item No.TRCB152TRCB178TRCB189TRCB216TRCB218
Diameter(mm)15.217.818.921.621.8
Strands1*71*71*71*71*19
Mass per meter(kg)1.11.51.732.242.48
Cross sectional area(m)140191220285313
Steel Grade(Mpa)18601860186018601860
Tensile strength(kN)260(26.5T)335(36.2T)409(41.7T)530(54.1T)583(59.5T)
Min 0.2% extension under load(kN)229311360466513
Min.Elongation(%)3.53.53.53.53.5


Accessories

Fish Hooks

Expansion shell

Grouting tube

Breathing tube

Bearing plate


Application

Mines

Tunnels

Slopes

Places where need ground support

Length & Package

Length:500mm to 6200mm in pieces or in coils

Package:20 pcs each bundle

As customer’s requirement

                               Bulbed Cable Bolt

How to work

The nature of the ground must be evaluated.

Drill a hole in the area according to bolt diameter, bolt length. The length of hole is 200mm to 500mm shorter than the bolt.

Attach a breather tube to the full length of the bolt. Breather tube protrudes about two meters from the hole.

Attach about one meter of grout tube to the end of the cable bolt with sufficient tail provided to connect to the pump.

Insert the cable bolt and seal the hole to eliminate lose of grout when pumping.

Connect the grout tube to pump and place the breather tube into a container of water when pumping start. We will seethat in the water container that air bubbles will exhaust from the breather tube, when the hole is full of grout, air bubbles will disappear.

Cable bolt can be tensioned after the grout has cured.




Leave your messages

Related Products

Popular products